Sharp RZ-X 650 - Manual (Page 9)

7
DISPLAY
Display angle
The display may be tilted for the best viewing angle. The angle can be adjusted within
140 degrees left/right and 45 degrees up/down as illustrated in the picture.
Caution:
•
Do not pull the display beyond the maximum tilt angle nor apply excessive pressure to
the display.
•
Make sure to hold the body when pulling the display so that the terminal may not
move.
•
The LCD module built in this POS terminal is manufactured with highly precise
technology, however bright pixels or blank pixels may appear. Also an irregular color
and brightness may occur depending on the view angle. Please note that this type of
phenomena is common for LCDs and may not be a malfunction.
•
The backlight in the display is a consumable part.
•
When the LCD display can no longer be adjusted and becomes darker, you should
replace the LCD module. Consult your authorized SHARP dealer for further details.