Sharp RZ-X 650 - Manual (Page 3)

1
INTRODUCTION
IMPORTANT
Thank you very much for the purchase of a SHARP POS Terminal.
Please read this manual carefully before operating your POS Terminal.
Please keep this manual for future reference.
•
Install this terminal in a location that is not subjected to direct radiation, unusual
temperature changes, and high humidity or exposure to water or other liquids.
Installation in such locations could cause damage to the cabinet and the electronic
components.
•
Do not drop this terminal nor subject it to any strong shock.
This may cause damage to the terminal and the hard disk mounted in it.
•
Do not apply excessive pressure to the display. Do not use a sharp-pointed object on
the display.
This may cause damage to the LCD display.
•
The socket-outlet shall be installed near the equipment and shall be easily accessible.
For a complete electrical disconnection, remove the AC plug from the wall outlet.
•
The terminal plugs into any standard wall outlet (official / nominal voltage).
Other electrical devices on the same electrical circuit could cause the terminal to
malfunction.
•
Slots and openings in the cabinet and the back have been provided for ventilation.
To ensure the reliable operation of your system and protect it from overheating, these
openings must not be blocked or covered.
•
Please observe the following when an optional drawer is used.
The drawer units should be securely fitted to the supporting platform to avoid
instability when the drawers are open.
English