Beko NICAM STEREO - Manual (Page 22)

21
Connecting a DVD
player
Via SCART
Make sure the TV and DVD player are both
switched off.
Plug one end of the SCART lead (not
supplied) into the back of the DVD player
and the other end into one of the SCART
sockets on the back of the TV.
Switch on the DVD and the TV.
Press theAV button on the remote
control to select AV1, AV2 or AV3
(optional) to correspond with
SCART socket you are using
on the back of the TV.
Via RCA lead (optional)
Make sure the TV and DVD player are both
switched off.
Plug one end of the RCA lead into the video
and audio out sockets on the back of the
DVD player and plug the other end into the
video and audio in sockets of the TV.
Press the AV button repetitively and
select the AV3 mode by two scart
models or select AV4 mode by three
scart models.
Press the AV button repetitively
to select AV3S by two scart
models or AV4S by three scart
models.
Plug the S-Video plug into the S-Video
socket and the audio leads into the audio
sockets.
You can also connect it through the
S-Video socket of the TV (optional).
Via RCA lead and S-Video socket
R
L
MONO
VIDEO
R
L
MONO
VIDEO
S-Video In
R
L
AUDIO OUT
AV1
AV2
AV3
AV
AV
AV