Sharp KC-860E - Manual (Page 11)

E-9
ENG
Use the Clean Air Mode when additional humidity is not required.
CLEAN AIR MODE
CLEAN ION SHOWER Mode with humidifi cation releases high-density Plasmacluster ions.
By continuously discharging strong airfl ow for 15 minitues, the unit effectively removes air-
borne dust, pollen, mold and allergens from the air as they are drawn through the fi lter system.
Water must be in the Water Tank when this mode is selected.
The unit humidifi es when there’s water in the Water Tank, and it operates without humidifying
when there’s no water in it.
Press the Power OFF Button to turn the unit off.
Press the Power OFF Button to turn the unit off.
Fan Speed Button
Please note the fan speed cannot be adjusted during the CLEAN ION SHOWER MODE.
AUTO operation
The fan speed is automatically switched (between HIGH and LOW) depend-
ing on the amount of impurities in the air. The sensors detect impurities for
effi cient air purfi cation.
POLLEN mode
The unit will operate at High Level for
10 minutes, then will atternate be-
tween MEDIUM and HIGH.
10 minutes: High fan level
20 minutes: Medium fan level
20 minutes: High fan level
MAX operation The unit will operate at maximum fan speed.
MEDIUM operation The unit will operate at medium fan speed.
LOW operation The unit will operate quietly using minimal air intake.
CLEAN ION SHOWER MODE
1 Press the CLEAN AIR MODE Button on the display.
• If the power cord was not unplugged between uses, the unit will
automatically re-start at the previously selected settings.
2 Press the FAN SPEED BUTTON to select the de-
sired fan speed.
• Indicator lights will show the fan
speed currently selected.
1 Press the CLEAN ION SHOWER MODE Button
on the display to select this mode.
When the operation fi nishes, the unit will return to the prior
operation.
operation
*HiGH fan speed is an intermediate speed between MEDIUM and MAX.
KC-840E_Eng2.indd Sec1:9 2009/09/24 12:23:03