Belkin USB 2.0 5-Port PCI Express Card F5U252ea - Manual (Page 7)

4 5
EN
Hardware Installation
1. After completion of software setup, power off your
computer and disconnect all devices and peripherals.
2. Remove the cover from your computer. Refer to your
computer manufacturer’s user manual for details on how
to do this. Touch any bare metal portion of your computer
case to discharge yourself of any static electricity to
prevent damage to your computer and the Card.
3. Locate the PCI Express slot on your computer’s main
circuit board. Remove the metal plate that covers the
rear slot corresponding to the PCI Express slot you have
selected (see image below).
4. Remove the Card from its protective, anti-static
packaging. Handle it by the metal bracket and do not
touch the gold-edged connectors. Insert the Card into the
PCI Express slot, carefully aligning the rear bracket to the
computer case. Push firmly to make sure the Card’s edge
is fully inserted into the slot.
1
2
3
4
5
P75031ea_F5U252ea.indb 5 14/3/06 4:47:36 pm