Brother P-touch PT-2700 - Manual (Page 8)

BEFORE USING YOUR P-TOUCH
6
Safety Precautions
CAUTION
Battery
Follow these guidelines to avoid liquid leakage, heat, rupture of the battery.
Do not use old and new batteries
together.
Do not mix alkaline batteries with
other type batteries. Do not set the positive and negative
end in the wrong position.
Remove the batteries if you do not
intend to use the P-touch for an
extended period of time.
AC adaptor
Be sure to disconnect the AC adaptor
from the power outlet and the P-touch
when not using the P-touch for any
extended period of time. Always hold the plug when
disconnecting the power cord from
the power outlet.
Tape Cutter
Follow these guidelines to avoid personal injury and damage of the P-touch.
Do not touch the blade of the cutter
unit.
Do not open the tape compartment
cover when operating the cutter unit. Do not apply excessive pressure to
the cutter unit.
Usage/Storage
Follow these guidelines to avoid personal injury and damage of the P-touch.
Place the P-touch on a flat, stable
surface such as a desk. Do not place any heavy objects on top
of the P-touch.
Memory
Any data stored in memory will be lost
due to failure or repair of the P-touch,
or if the battery expires.
When power is disconnected for more
than two minutes, all text and format
settings will be cleared. Any text files
stored in the memory and clock
settings will also be cleared.
Tape
Depending on the location, material, and environmental conditions, the label may
unpeel or become irremovable, the colour of the label may change or be
transferred to other objects.
Before applying the label, check the environmental condition and the material.
Test the label by affixing a small piece of it to an inconspicuous area of the
intended surface.