Brother P-touch PT-2700 - Manual (Page 66)

LABEL PRINTING
64
Manual Cutting
When using Fabric Tapes or Strong Adhesive Tapes, set "On" for Manual Cutting
before printing. After printing, remove the tape cassette from the machine and use
scissors to cut the tape.
Press the key to display the setup menu, select
"Special Tape" using the or keys, and then
press the
or key.
Select the value by using the or keys.
Press the or key to apply the setting.
You can adjust the accuracy of the printed label length in increment of -5 to +5.
Press the key. The current settings are
displayed.
Select "Adjust Length." by using the or keys,
and then set the value by using the or keys.
Press the or key to apply the setting.
Manual Cutting
1
2
3
• Press the key to return to the previous step.
• Press the key to set the value to its default setting ("Off").
Adjusting the Label Length Accuracy
1
2
3
• Press the key to return to the previous step.
• Press the key to set the value to default setting.
• Approximately 1% of the total label length will be adjusted by 1 level.