BT 2010 - Manual (Page 33)

Base station factory settings:
Base ringer volume 5
Base melody 1
PIN code 0000
Shared Directory Empty
Please note
In the event of a malfunction or lockup,
remove the power from the base for 30 seconds
and then re-apply. This will reactivate the
base station. Please wait for the handsets to
reconnect before use.
30
Freestyle 2010 ~ Issue 2 ~ Edition 1 ~ 25th June ’02 ~ 4795
If you change your base station PIN
keep a record of the new number by
writing it in the space provided on
page 7
.
Please note that when you enter your
base station PIN it will not be shown
on the display for security reasons.
Press the MENU button. The display
will show REDIAL.
Press the DOWN button until the
display shows BS SETTINGS.
Press the
✔
button.
The display will show AUDIO.
Press the DOWN button until the
display shows CHANGE PIN.
Press the
✔
button.
The display will show a flashing
cursor and ENTER PIN.
Enter the current PIN (factory
setting 0000).
Press the
✔
button to confirm.
The display will show a flashing
cursor and NEW PIN.
Enter the new PIN.
Press the
✔
button to confirm.
The display will show a flashing
cursor and REPEAT.
Enter the new PIN again.
To change the base station PIN
Menu
ᮢ
Press the
✔
button to confirm. You
will hear a confirmation beep.
The display will show STORED and
then CHANGE PIN.
Press the
✘
button until you return
to the standby screen.
ᮢ
Customer Helpline
If you experience any difficulties with your
Freestyle 2010, please contact the Freestyle
Helpline on
0870 240 3962 or email
[email protected]
B
ASE
S
T
A
TION
SETTINGS