BT 2010 - Manual (Page 16)

13
Freestyle 2010 ~ Issue 2 ~ Edition 1 ~ 25th June ’02 ~ 4795
USING
Y
OUR
PHONE
If you do not want your telephone
number sent to the person you are
calling you can withhold it. You will
need to do this each time you make
a call.
Press the MENU button.
The display will show REDIAL.
Press the DOWN button until the
display shows WITHHOLD.
Press the
✔
button.
The display will show
DIAL NOW
.
Enter the number you want to dial.
Press the TALK button.
The withhold code will be dialled
and then the telephone number.
To withhold your number when
making a call
Menu
ᮢ
During a call you can adjust the
speech volume of your caller. There
are 3 volume levels: low
■, medium
■ ■ and high ■ ■ ■.
During a call:
Press the MENU button.
(You need to wait until a forward
arrow
ᮣ appears in the display.)
To adjust the speech volume
during a call
Menu
Press the DOWN button until the
display shows IN CALL VOL.
Press the
✔
button.
The display will show the current
level with a tick on the right of the
display,
e.g.,
■ ■ ■
✔
.
Press the DOWN button to increase
the volume.
Once the maximum level is reached,
press the DOWN button to return to
the lowest level.
When you have reached the level
you require, press the
✔
button.
The volume will not change until
the
✔
is pressed.
The display will show STORED.
ᮢ
ᮢ
ᮢ
Secrecy
When on a call you can talk to someone in the
same room without your caller hearing.
During a call:
Press the
✘
button. The display will
show the icon. Your caller cannot
hear you.
Press the
✘
button again to return
to your caller.
To switch secrecy on and off