Notice, Program spin speeds, Modifiers – Bosch WFMC8400UC User Manual
Page 19: Option buttons
19
Notes
Cycle time will vary depending on cycle
selected, temperature and pressure of
incoming water, water hardness, size
of load, type of fabrics and distance of
unit from the drain.
The maximum spin speeds of the
programs are dependent upon the
cycle. For adjusting the spin speed, see
page 19.
Program Spin Speeds
Maximum spin speeds of the
programs
The indicator light max spin speed" is lit red.
Revolutions
per minute
Program
1100
Regular/Cotton
1100
XXTRA SANITARY
1100
KIDSCARE
1100
Refresh
1100
Rinse & Spin
1100
Spin
1000
KIDSCARE (300 Series
model)
1000
Quick Wash 25
1000
Regular/Cotton (300 Series
model)
800
Permanent Press
800
Wool
800
Jeans
600
Delicates
Reduced spin
The indicator light reduced spin" is lit
red only if you have selected a reduced
spin speed for gentle treatment of your
laundry.
Gentle spin speeds
The indicator light Gentle spin speed" is lit
red.
Revolutions
per minute
Program
400
Hand Wash
400
Soak
No final spin
The indicator light no final spin" is lit
red.
For delicate laundry, the water remains
in the machine after the last rinse,
except for the 500 Plus series, which
automatically drains at the end of the
cycle.
Use this setting to avoid creasing if the
clothing cannot be taken out of the
washing machine immediately upon
completion of the cycle.
NOTICE
Before unloading you must drain the
remaining water by selecting
Drain
or
Spin and starting the machine.
(Does not apply to 500 Plus Series).
Modifiers
Spin Selection
Preset cycle setting of max. spin speed
can be changed.
Press this button until the desired
setting lights up.
Delay Start
Before starting a program you can
modify by when the cycle should be
started.
Press
Delay Start button. The display
shows the start time
0:00
.
The time can be delayed up to a
maximum of 19 hours (with 1 hour
increments) by pressing the
Delay
Start button repeatedly.
Each press of the Delay start button
increases the delay start time by one
hour.
The
Start time begins running
immediately after pushing the
Start/Pause button. This is indicated
by the points between the digits
flashing.
i
Changes to the
Start time are
possible at any time, press the
Delay Start button until the new
time appears.
i
If the program is changed or if the
program is interrupted, the
preselected
Start time is also
interrupted. The
Ready in time of
the program is displayed. The
Start time must be reselected.
Option buttons
Bleach
When this button is pressed, a bleach
cycle will be added to the selected
cycle. (Does not apply to 500 Plus
Series).
The washing cycle time is extended
accordingly.
q
The Bleach option is not available
if the Delicate, Hand wash or Wool
cycle is selected.
Rinse Plus
When this button is pressed, an
additional rinsing cycle will be added to
the selected cycle.
Washing cycle time is extended
accordingly.
Heavy duty
The Heavy duty option is
recommended for use
ONLY for
heavily soiled clothes that require
the removal of tough, ground-in
protein-based stains. It is NOT
recommended to use the Heavy duty
option with other cycles when
laundering normal or lightly soiled
clothes.