Bosch WFMC8400UC - Manual (Page 13)

13
OPERATING INSTRUCTIONS
Before using
d WARNING
To reduce the risk of fire, electric
shock, or injury to persons, read the
IMPORTANT SAFETY
INSTRUCTIONS before operating
this appliance.
d WARNING
Before using your washer, read and
follow all installation and operating
instructions.
Panel
C Display
The Ready in time is displayed,
if a program is selected.
The Start In time is displayed, if
this function is additionally
selected.
A Start/Pause
button
Starts or interrupts the
washing cycle (program
must first be selected).
G Program Selector
Switches the machine on and off and
selects the program. Can be turned in
both directions.
The program selector does not turn while
the program is running - the program
sequence is electronically controlled.
F Indicator Lights
LED'S light up in sequence to show the
current program cycle.
Door Locked lights
up if a program is selected and the Start
button is pressed.
Wash, Rinse and Spin LED's light up as
the respective program segment runs.
Finished lights up if the program has
ended. Indicator lights flash to indicate
an operation error (see troubleshooting
guide, page 24)
B Option buttons
Add functions to the program
selected. The option button
LED is lit when the option is
selected. Press the option
button again to turn the
option off (LED turns off).
D Spin Selection
Button
Changes the spin speed (if
required). The indicator light of
the selected spin speed is lit
red.
Start/Pause LED Status
Lit Red: Program is
running and "Pause" can
be activated.
Blinking: Settings can
be changed, the wash
cycle can be started,
door is locked for
reasons of safety or
program is in Pause"
mode.
Not Lit: Program is
finished or there is no
program selected.
B
C
D
F
G
A
E
Additional Functions Status Display Program Selector
Option Functions
ECO e : Reduces the amount
of energy used for the
washing program.
Bleach: Adds a bleach cycle
to the program running.
Rinse Plus: Adds an
additional rinse cycle.
Heavy duty: Increases wash
time for heavily soiled loads.
Additional options can be
combined at any time.
E Delay Start Button
The Start In time can be
delayed up to a maximum of
19 hours (if required).
The display shows the Delay
Start time.