Briggs & Stratton Ram 44 / 968999551 - Manual (Page 76)

English
-74
TECHNICAL DATA
Accessories
BioClip attachment (Mulch kit)
Collection system
Torque Specifications
·Engine crankshaft bolt 50 ft/lb (67 Nm)
·Deck pulley bolts 45 ft/lb (61 Nm)
·Lug nuts 75 ft/lb (100 Nm)
·Blade bolt 45-55 ft/lb (60-75 Nm)
·Standard ¼” fasteners 9 ft/lb (12 Nm)
·Standard 5/16” fasteners 18 ft/lb (25 Nm)
·Standard 3/8” fasteners 33 ft/lb (44 Nm)
·Standard 7/16” fasteners 52 ft/lb (70 Nm)
·Standard ½” fasteners 80 ft/lb (110 Nm)
When this product is worn out and no longer used, it should be returned to the reseller or other party for
recycling.
In order to implement improvements, specifications and designs can be altered without prior
notification.
Note that no legal demands can be placed based on the information contained in these
instructions.
Use only original parts for repairs. The use of other parts voids the warranty.
Do not modify or install non-standard equipment to the unit without consent from the
manufacturer. Modifications to the unit may cause unsafe operations or damage the unit.