Briggs & Stratton Ram 44 / 968999551 - Manual (Page 35)

English-
33
OPERATION
Stopping the Engine
Allow the engine to idle a minute in order to
attain normal operating temperature before
stopping it, if it has been worked hard. Avoid
idling the engine for longer periods, as there
is a risk of the spark plugs fouling.
1. Disengage the mower deck by
depressing the blade switch.
2. Raise the mower deck by depressing the
pedal forward to the transport position.
3. When the machine is standing still,
activate the parking brake by pulling the
lever backward.
4. Move the throttle to the minimum position
(tortoise symbol). Turn the ignition key to
the stop position. Never use choke to
stop engine.
5. Move the steering controls outward.
6. Remove key. Always remove key when
leaving the mower to prevent
unauthorized use.
8011-668
Disengage the mower deck
8011-718-2
Raise the mower deck with the pedal
IMPORTANT INFORMATION
Leaving the ignition switch in any other
position than "OFF" will cause the battery
to be discharged and the hour meter to
accumulate hours.