BT Videophone 1000 - Manual (Page 47)

Videophone 1000 – Edition 3 – 26.05.06 – 7351
IMPORTANT
You will not normally need to use these options unless advised to
change the settings by the Helpdesk.
Open the network settings menu.
1. Press MENU , scroll to SETTINGS and press OK .
2. Scroll to Network Settings and press OK .
IP Address
1. Open the Network Settings menu and press OK .
2. Press OK to select IP Address .
to set Dynamic Address (DHCP)
Press OK . Dynamic Address (DHCP) is set.
to set Static Address
Scroll to Static Address and press OK .
IMPORTANT
If you set the IP address to Static Address, you will need to provide the
IP Address, Net Mask, Gateway Address and DNS Address.
Bandwidth profile
1. Open the Network Settings menu and press OK .
2. Scroll to Bandwidth profile and press OK .
3. Press OK to select High or scroll or to Medium ,
Low or Custom then press OK .
Network settings
47