Charge your phone wirelessly – Nokia Lumia 1020 User Manual

Page 11

Make sure your computer is switched on.
First connect the USB cable to the computer, then to your phone. When the battery is full, first

disconnect the USB cable from your phone, then from the computer.

The battery can be charged and discharged hundreds of times, but it will eventually wear out. When

the talk and standby times are noticeably shorter than normal, to replace the battery, take the device

to the nearest authorized service facility.

Charge your phone wirelessly
No need for hassle with cables, just pop your device on a wireless charger, and it immediately starts

charging.
The charging areas on the phone and the charger need to touch, so make sure you align the phone

and charger properly. Not all phone models fit in all chargers.

You need a Nokia wireless charging cover CC-3066, marked with the Qi logo inside the cover, for

wireless charging to work. The cover may be included in the sales box, or it may be sold separately.

Only use original Nokia wireless charging covers.
Nokia wireless chargers, such as the wireless charging plate DT-900, are sold separately.
Use only Qi compatible chargers for wireless charging.
1. Make sure the wireless charger is switched on.

2. With the wireless charging cover in place, place your phone on the wireless charger so that the

charging areas touch.

3. When the battery is full, remove your phone from the charger.
The charging area is highlighted.