beautypg.com

Battery, Battery and charger information, Take care of your device – Nokia C3-00 User Manual

Page 37: Product and safety information 37

background image

Battery

Battery and charger information
Your device is powered by a rechargeable battery. The battery intended for use with this device is BL-5J. Nokia may make

additional battery models available for this device. This device is intended for use when supplied with power from the following

chargers: AC-3. The exact charger model number may vary depending on the type of plug. The plug variant is identified by one

of the following: E, EB, X, AR, U, A, C, K, or UB.

The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times

are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with

Nokia approved chargers designated for this device.

If a battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to

connect the charger, then disconnect and reconnect it to begin charging the battery. If the battery is completely discharged, it

may take several minutes before the charging indicator appears on the display or before any calls can be made.

Safe removal. Always switch the device off and disconnect the charger before removing the battery.

Proper charging. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery

connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge

over time.

Avoid extreme temperatures. Always try to keep the battery between 59°F and 77°F (15°C and 25°C). Extreme temperatures

reduce the capacity and lifetime of the battery. A device with a hot or cold battery may not work temporarily. Battery

performance is particularly limited in temperatures well below freezing.

Do not short-circuit. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct

connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might

happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the

battery or the connecting object.

Disposal. Do not dispose of batteries in a fire as they may explode. Dispose of batteries according to local regulations. Please

recycle when possible. Do not dispose as household waste.

Leak. Do not dismantle, cut, open, crush, bend, puncture, or shred cells or batteries. In the event of a battery leak, prevent

battery liquid contact with skin or eyes. If this happens, flush the affected areas immediately with water, or seek medical help.

Damage. Do not modify, remanufacture, attempt to insert foreign objects into the battery or immerse or expose it to water or

other liquids. Batteries may explode if damaged.

Correct use. Use the battery only for its intended purpose. Improper battery use may result in a fire, explosion, or other hazard.

If the device or battery is dropped, especially on a hard surface, and you believe the battery has been damaged, take it to a

service center for inspection before continuing to use it. Never use any charger or battery that is damaged. Keep your battery

out of the reach of small children.

Take care of your device
Handle your device, battery, charger and accessories with care. The following suggestions help you protect your warranty

coverage.

Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode

electronic circuits. If your device gets wet, remove the battery, and allow the device to dry.

Do not use or store the device in dusty or dirty areas. Moving parts and electronic components can be damaged.

Do not store the device in high temperatures. High temperatures can shorten the life of the device, damage the battery,

and warp or melt plastics.

Do not store the device in cold temperatures. When the device warms to its normal temperature, moisture can form inside

the device and damage electronic circuits.

Product and safety information 37