Nokia 7370 - Manual (Page 60)

S e t t i n g s
59
USB data cable
You can use the USB data cable to transfer data between the phone and
a compatible PC or a printer supporting PictBridge. You can also use the
USB data cable with Nokia PC Suite.
To activate the phone for data transfer or picture printing, connect the
data cable; when the phone displays
USB data cable connected. Select
mode. , select OK . Select from the following modes:
Default mode — to use the cable for PC Suite
Printing — to print pictures directly from the phone using a
compatible printer
To change the USB mode, select Menu > Settings > Connectivity > USB
data cable > Default mode , Printing , or Data storage .
■ Call
Select Menu > Settings > Call and from the following options:
Call forwarding — to forward your incoming calls (network service). You
may not be able to forward your calls if some call restricting functions
are active. See
Call restrictions in “Security,” p. 62.
Anykey answer > On — to answer an incoming call by briefly pressing any
key, except the power key, the camera key, the left and right selection keys,
or the end key
Automatic redial > On — to make a maximum of 10 attempts to connect
the call after an unsuccessful call attempt
1-touch dialing > On — to dial the names and phone numbers assigned to
the 1-touch dialing keys 2 to 9 by pressing and holding the corresponding
number key
Call waiting > Activate — to have the network notify you of an incoming
call while you have a call in progress (network service). See “Call waiting,”
p. 22.
Summary after call > On — to briefly display the approximate duration
and cost (network service) of the call after each call
Send my caller ID > Yes — to show your phone number to the person you
are calling (network service). To use the setting agreed upon with your
service provider, select
Set by network .