Sounds settings, Stop watch – Nokia 6215i User Manual
Page 42

S e t t i n g s a n d t o o l s
41
Notepad
To create a note, select
Menu
>
Settings & Tools
>
Tools
>
Notepad
>
New
, enter
your note text (see "Text entry," p. 18), and select
SAVE
. To view or edit a note,
highlight the note, and select
VIEW
>
Edit
. To delete one note or all notes, select
Notepad
>
Options
>
Erase
or
Erase All
.
Stop watch
The stop watch can be used for elapsed time measurement, such as for a sporting
event. Up to six events or records can be timed simultaneously.
The stop watch accuracy is not the same as that of a professional instrument.
Therefore, Nokia advises against its use for official competitions or any other event
in which a high-precision device would be required to establish exact times.
To time a single event, select
Menu
>
Settings & Tools
>
Tools
>
Stop Watch
>
Start
.
The elapsed time is displayed in h:mm:ss:ms format. To stop or pause the stop watch,
select
Stop
. To resume the stop watch from the stopped time, select
Start
again. To
reset the stop watch to zero, select
Reset
with the watch in stopped mode.
To time multiple events, select
Menu
>
Settings & Tools
>
Tools
>
Stop Watch
>
Start
. To mark the elapsed time for each event you are measuring, select
Cont
(up to six times). To display the event times, select
View
.
■ Sounds settings
To adjust volumes and assign sounds to phone calls and alarms, select
Menu
>
Settings & Tools
>
Sounds Settings
and from the following options:
Master Volume
—Use the volume keys or scroll key to change the volume setting
of your phone from
High
to
Low
or to
Alarm Only
or
Vibrate Only
, then select
OK
.
To silence the phone, scroll down, or press and hold the volume down key until
All Sounds Off
is displayed. To preview the sound level, select
Play
.
Call Sounds
—To set ringtones for incoming calls, select
Call Ringtone
. To set the
phone to vibrate when a call is received, select
Call Vibrate
>
On
.
Alert Sounds
—Select the alert type (
Tone
,
Vibrate
, or
Reminder
) for an incoming
TXT Message
,
PIX Message
, or
Voicemail Msg
.
Keypad Volume
—Use the volume keys or scroll key to set the keypad volume from
Off
to
High
.
Earpiece Volume
—Use the volume keys or scroll key to set the earpiece volume
from
Low
to
High
.
Service Alerts
—Set any of the alert options to
On
or
Off
: