Nokia 8860 - Manual (Page 45)

[ 40 ]
Note: The order of the following steps may vary, depending on which
dialing sequence your card uses.
• Enter access number when prompted for the calling card’s access
number (usually the 1-800 number listed on the back of the calling
card). Press
OK .
Note: You can also retrieve the access number from your phone book if it
has already been stored. Simply press
Search , then or to find
the number.
• Enter card number and/or PIN when prompted to enter calling card
number and personal identification number. Press OK . Press OK again
at Save changes ?
• Press or to Card name and press Select . Enter the card
name using your phone’s keypad. Press OK .
Note: See “Entering letters and numbers” on page 21 if you need help on
entering the card name.
For details about your phone’s security code, see “Security code” on page 58.
*These calling cards are frequently used with these dialing sequences.
However, they may vary and are subject to change at the phone
company’s discretion.
Dialing sequence Use for cards that require
you to:
Cards using this
sequence *
Access no.
+ phone no.
+ card no. Dial 1-800 access number,
then phone number, then card
number (+ PIN if required) MCI, AT&T True
Choice, Sprint
Canada, Unitel
Access no.
+ card no.
+ phone no. Dial 1-800 access number,
then card number (+ PIN if
required), then phone number networkMCI,
WorldPhone
MCI
Prefix
+ phone no.
+ card no. Dial the prefix (any numbers
that must precede the phone
number) and phone number
you want to dial, then card
number, (then PIN, if required) GTE, PacBell,
AT&T, Stentor