Nokia 3600 - Manual (Page 62)

[ 53 ]
Contacts
2 Scroll to the number to which you want to add the voice tag and
select
Options
→
Add voice tag .
Press Start, then speak after tone is displayed.
3 Press Start to record a voice tag. The phone sounds a starting tone
and Speak now is displayed.
When recording, hold the phone a short distance from your mouth.
After the starting tone, say clearly the word(s) you want to record as
a voice tag.
4 After recording, the phone plays the recorded tag and Playing voice
tag is displayed. If you do not want to save the recording, press Quit .
5 When the voice tag has been successfully saved, Voice tag saved is
displayed and a beep sounds. A symbol can be seen next to the
number in the contact card.
Note: Your phone may have 30 phone numbers to which voice tags are
attached. If the memory becomes full, delete some of the voice tags.
Tip: To view a list of voice tags you have defined, select Options
→
Contacts info
→
Voice tags in the Contacts directory.
MAKE A CALL BY SAYING A VOICE TAG
Note: You must say the voice tag exactly as you said it when you
recorded it.
1 In standby mode, press and hold . A short tone is played and
the note Speak now is displayed.
2 When you are making a call by saying a voice tag, the loudspeaker is
in use. Hold the phone at a short distance away from your mouth and
face and say the voice tag clearly.
3 The phone plays the original voice tag, displays the name and number,
and after 1.5 seconds dials the number of the recognized voice tag.
If the phone plays the wrong voice tag or to retry voice dialing, press Retry .
Note: When an application using a data call or GPRS connection is sending
or receiving data, you cannot make a call by using voice dialing.
To make a call by using a voice tag, end all active data connections.