Nokia 1221 - Manual (Page 44)

35 Copyright © 2004 Nokia
Security
10 Security
• SECURITY CODE
The security code prevents unauthorized users from changing certain important feature
settings on your phone. The phone prompts you to enter the security code when required.
The default code is 12345. Nokia recommends that you change the default code
immediately.
Note: If you enter an incorrect security code five times in a row, the phone will not
accept the correct code for 5 minutes.
Use this procedure to change the security code.
1 From the menus, select Settings > Security settings > Change security code.
2 At the Security code prompt, enter the default security code (12345) or your current
security code and select OK.
3 At the Enter new security code prompt, enter your new five-digit security code and
select OK.
4 At the Verify new security code prompt, enter your new security code again and select OK.
Keep your security code secret and stored in a safe place away from your phone. If you have
changed your security code and do not remember the new code, contact your service provider.
• CALL RESTRICTION
You can create up to 10 restrictions to restrict incoming and outgoing calls.
When calls are restricted, calls still may be possible to the official emergency number
programmed into your phone.
Add a number to the call restriction list
1 From the menus, select Settings > Security settings > Call restrictions.
2 Enter your security code and select OK.
3 Select Restrict outgoing calls > Add restriction.
4 Enter the number you want to restrict and select OK.
For example: If you want to restrict all long distance calls that begin with 1, enter 1. If
you want to restrict all calls that begin with 972, enter 972.
5 Enter a name for the restriction and select OK.
If you select OK without entering a name, the number will be used.