Nokia 8890 - Manual (Page 56)

[ 47 ]
Advanced calling features
Save calling card information
1 Press Menu 4 4 2.
2 Scroll to the calling card information you want to change, then press
Options.
3 Scroll to Edit, then press OK.
4 Enter your security code, then press OK.
5 At Dialing sequence, press Select. Scroll to the dialing sequence your
card uses (see chart on the next page) then press Select.
Note: The order of the following steps may vary, depending on which
dialing sequence your card uses.
6 Enter the access number (usually the 1-800 number listed on the back
of the calling card), then press OK.
7 Enter the card number and/or PIN, then press OK.
8 Your phone displays Save changes? Press OK.
9 Scroll to Card name: and press Select.
10 Enter the card name, then press OK.
Dialing sequence
Use for cards
that require you to:
Cards using
this sequence
Access no.
+ Phone no.
+ Card no. Dial the 1-800 access number,
then phone number, then card
number (+ PIN if required). MCI, AT&T True
Choice, Sprint
Canada, Unitel
Access no.
+ Card no.
+ Phone no. Dial the 1-800 access number,
then card number (+ PIN if
required), then phone number. networkMCI,
WorldPhone MCI
Prefix
+ Phone no.
+ Card no. Dial the prefix (any numbers
that must precede the phone
number) and phone number
you want to dial, then card
number (then PIN, if required). GTE, PacBell, AT&T,
Stentor