Nokia 6822 - Manual

2
3
Install the SIM card.
Insert and charge the battery.
Welcome to the Nokia 6822 messaging device!
Thank you for purchasing the Nokia 6822 messaging device.
This Quick Start Guide will help you get started with your new
device quickly and easily. This guide covers only the basics. It is
highly recommended that you review the Getting Started
CD-ROM included in the sales package.
The SIM card
Your Nokia 6822 messaging device uses a convenient SIM card (fig. 2.1)
that holds information about your wireless service and contact information.
If you already have a SIM card, you can transfer your service and contacts
to your new phone by simply inserting the SIM. If you do not have a SIM
card or service for the phone, contact your wireless provider.
Insert the SIM card
Follow the directions below if your phone displays “Insert SIM card” (fig. 2.2).
1. Turn the phone off and remove the back cover by pushing
the release button toward the bottom of the phone, at the
same time, lifting the back cover away from the phone.
2. Lift and remove the back cover (fig. 2.3).
3. Lift the SIM card holder up (fig. 2.4).
4. Insert the SIM card into the slot. Make sure the gold
contacts are facing down and the beveled corner is
pointed towards the bottom of the phone (fig. 2.5).
5. Close the SIM card slot.
6. Slide the SIM card to the left and lock it.
You should hear it click into place.
Take a moment to look through your Nokia 6822 messaging device sales packet.
Please make sure the following components are included:
1. Nokia 6822 messaging device
2. Nokia Battery BL-5C (850 mAh Li-Ion)
3. Nokia Travel Charger ACP-12
4. Headset HS-5
5. Nokia 6822 Getting Started CD-ROM
6. Nokia 6822 User Guide
7. Nokia 6822 Application Guide
The Nokia BL-5C battery is inserted under the back cover. This Li-Ion 850 mAh battery provides power in a
lightweight package. A fully charged battery has up to 8 hours of talk time and up to 14 days of standby time.
Insert and charge the battery
After you have inserted the SIM card (see above), follow the steps below to insert and charge your battery.
1. Slide the battery into the back cover as shown (fig. 3.1).
2. Replace the back cover.
3. Plug the Nokia ACP-12 charger into a standard AC wall outlet.
4. Connect the charger cable to the bottom of the Nokia 6822 device (fig. 3.2).
Recharging time is approximately one hour and thirty minutes while
the phone is in standby mode. While charging is in progress, the
battery charge indicator scrolls on the phone display. You can use
phone and messaging functions while charging is in progress. When
the battery is fully charged, the charge indicator stops scrolling.
Note: The first time the battery is charged, allow the battery to fully
charge before using your device.
fig. 2.1
fig. 2.3
fig. 2.5
fig. 3.1
fig. 3.2
Take inventory.
7.
1
4.
3.
1.
All screen images are simulated.
5.
2.
Quick Start Guide Quick Start Guide
9239111
6.
fig. 2.4