Packet data, Usb data cable – Nokia 5310 User Manual

Page 29

4. To connect your phone with any Bluetooth device in range, select Paired

devices > New.
Select a device and Pair.
Enter a passcode (up to 16 characters) on your phone and allow the connection on

the other Bluetooth device.

If you are concerned about security, turn off the Bluetooth function, or set My phone's

visibility to Hidden. Accept Bluetooth communication only from those you trust.

PC connection to the internet
Use Bluetooth to connect your compatible PC to the internet without PC Suite software.

Your phone must have activated a service provider that supports internet access, and

your PC has to support Bluetooth personal area network (PAN). After connecting to the

network access point (NAP) service of the phone and pairing with your PC, your phone

automatically opens a packet data connection to the internet.

Packet data

General packet radio service (GPRS) is a network service that allows mobile phones to

send and receive data over an internet protocol (IP)-based network.
To define how to use the service, select Menu > Settings > Connectivity > Packet

data > Packet data conn. and from the following options:
● When needed — to set the packet data connection to established when an

application needs it. The connection will be closed when the application is

terminated.

● Always online — to automatically connect to a packet data network when you

switch the phone on

You can connect a compatible PC to the phone by Bluetooth or USB data cable and use

the phone as a modem. For details refer to Nokia PC Suite.

See "Nokia support," p. 9.

USB data cable

You can use the USB data cable to transfer data between the phone and a compatible

PC or a printer supporting PictBridge.
To activate the phone for data transfer or image printing, connect the data cable and

select the mode:
● PC Suite — to use the cable for PC Suite

● Printing & media — to use the phone with a PictBridge compatible printer or with

a compatible PC

● Data storage — to connect to a PC that does not have Nokia software and use the

phone as a data storage device

To change the USB mode, select Menu > Settings > Connectivity > USB data

cable and the desired USB mode.

S e t t i n g s