Release panel, Theft protection, Removing the release panel 1 – Blaupunkt Acapulco CD51 User Manual
Page 6: Attaching the release panel
36
RELEASE PANEL
Release Panel
Theft Protection
Your device has a removable flip-release
panel to protect it from theft. Without this
panel, the unit is of no value to a thief.
Protect your device from theft by taking
the release panel with you whenever
you leave the vehicle. Do not leave the
panel in the car, even in a hidden place.
The release panel is designed for easy
handling.
Note:
●
Do not drop the panel.
●
Do not expose the panel to direct
sunshine or any other source of
heat.
●
Always carry the panel in the case
provided.
●
Avoid touching the contacts on the
panel with your skin. If necessary,
clean the contacts using a lint-free
cloth dipped in alcohol.
Removing the Release Panel
1
➮
Press the
button
1
.
The panel unlatches.
➮
Pull the panel off the device, first
straight forward and then to the left.
●
When the release panel has been
separated from the device, it
switches itself off.
●
All current settings are saved.
●
If a CD has been inserted, it re-
mains in the device.
Attaching the Release Panel
➮
Push the panel into the guides on
the device from left to right.
➮
Push the left hand side of the panel
into the device until it engages.
Note:
●
Do not press the display as you in-
sert the panel.
If the device was switched on when the
panel was removed, it will switch itself
back on automatically with the last set-
tings (radio, CD, CD-changer or AUX)
as soon as the panel is replaced.