Blaupunkt Acapulco CD51 - Manual (Page 15)

45
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
POR
TUGUÊS
Deactivating Wavebands
It is possible to deactivate the LW and
MW wavebands separately or together.
This makes sense if you don’t use these
wavebands, i.e. if you don’t listen to MW
or LW stations.
To deactivate the MW and LW wave-
bands together or separately:
➮
In FM radio mode, press the
MENU button
8
.
➮
Press the button
:
until
“AM ON” appears in the display.
Note:
If “AM OFF” shows in the display, MW
and LW are already deactivated.
If “MW OFF” or “LW OFF” appears in
the display, MW or LW is already deac-
tivated.
➮
Press the or button
:
to switch between “AM ON”,
“AM OFF”, “MW OFF” and
“LW OFF”.
➮
Press the MENU button
8
or
OK
;
. You settings are saved.
RADIO OPERATION TRAFFIC INFORMATION
Traffic Information
This device is equipped with an RDS
EON receiver. EON means Enhanced
Other Network.
Whenever a traffic announcement (TA)
is made, the radio switches automati-
cally from a station that does not broad-
cast traffic information to one in the
chain of stations that does.
After the traffic announcement, the de-
vice returns to the station that was pre-
viously tuned in.
Switching Traffic Information
Priority On / Off
➮
Press the TRAF button
?
.
Traffic announcement priority is activat-
ed if the traffic jam symbol is lit.
Note:
You will hear a warning tone:
●
If you leave the reception area of a
traffic radio station you are listening
to.
●
If, when you are listening to a CD,
you leave the reception area of the
selected traffic radio station and
the following automatic search fails
to find a new traffic radio station.
●
If you change from a traffic radio
station to a station with no traffic
information.
Either switch off traffic information pri-
ority, or switch to a station with traffic
information.