Nokia BH-905 - Manual (Page 9)

G e t s t a r t e d
9
Even if Bluetooth connectivity is deactivated, you can use the headset
for handling calls and listening to music through the CA-143U
audio cable.
Activate
To activate Bluetooth connectivity, press and hold the multifunction key
for about 2 seconds. The headset beeps, and the Bluetooth indicator
light briefly flashes green.
The headset tries to connect to the last used mobile device that supports
the HFP Bluetooth profile and the last used music player that supports
the A2DP profile, if the same device does not support both profiles.
When the headset is connected to the device and is ready for use,
the Bluetooth indicator light flashes blue slowly.
If the headset has not been previously paired with any device,
it automatically enters pairing mode. See also “Pair and connect the
headset to a Bluetooth device,” p. 9.
Deactivate
To deactivate Bluetooth connectivity, press and hold the multifunction
key for about 5 seconds. The headset beeps, and the Bluetooth indicator
light briefly flashes red.
If the headset is not connected to a Bluetooth device within about
30 minutes, the headset deactivates Bluetooth connectivity
automatically. Bluetooth connectivity is also deactivated if
you connect the CA-143U audio cable to the headset.
■ Pair and connect the headset to a Bluetooth
device
If your mobile device supports the A2DP Bluetooth profile and has
a music player feature, you can use the device to also play music
through the headset.
If your mobile device does not support the A2DP profile, you can
separately pair the headset with the mobile device and a music player
that supports this profile. If you have paired and connected the headset