Nokia BH-905 - Manual (Page 7)

G e t s t a r t e d
7
headset to the device (see “Pair and connect the headset to a Bluetooth
device,” p. 9).
If you plug the CA-143U audio cable into the headset when the headset
is connected to a Bluetooth device, the device is disconnected and
Bluetooth connectivity is deactivated.
Connect using the audio cable
The headset is supplied with the Nokia CA-143U audio cable. The
headset may also be supplied with adapters to connect the cable to
different devices. To extend the length of the audio cable, use the
CA-144U extension cable.
To connect the headset to a device that has the Nokia 3.5 mm AV
connector, plug the audio cable into the headset and the AV connector.
To connect the headset to a device that has a standard 3.5 mm audio
connector, plug the audio cable into the headset and the AD-63
adapter, and insert the adapter into the audio connector.
To connect the headset to a device that has a standard 2.5 mm audio
connector, plug the audio cable into the headset and the AD-52
adapter, and insert the adapter into the audio connector.
To connect the headset to a home stereo system that has a standard
6.3 mm headphone connector, plug the audio cable into the headset
and the AD-70 adapter, and insert the adapter into the headphone
connector.
To connect the headset to an airplane audio system that has a 3.5 mm
headphone connector, plug the audio cable into the headset and the
AD-71 adapter, and insert the adapter into the headphone connector.
■ Charge the battery
Before you can connect the headset to a Bluetooth device or use active
noise cancellation, you must charge the battery.
Before charging the battery, carefully read “Battery and charger
information,” p. 15.