Nokia BH-905 - Manual (Page 11)

G e t s t a r t e d
11
the Bluetooth menu of your device. If you disconnect the headset from
a music player while listening to music, first press the play/pause key to
pause playing.
You do not need to delete pairing with the headset to disconnect it.
Reconnect the headset
To manually connect the headset to the last used device that supports
the A2DP Bluetooth profile, but not the HFP profile (for example, after
connection loss), deactivate and activate Bluetooth connectivity on
the headset, or press the play/pause key when Bluetooth connectivity
is activated.
To manually connect the headset to the last used device that supports
the HFP Bluetooth profile or the HFP and A2DP profiles, start the
connection in the Bluetooth menu of your device, or press and hold
the multifunction key for about 2 seconds.
You may be able to set your device so that the headset connects to it
automatically. To activate this feature in a Nokia device, change
the paired device settings in the Bluetooth menu.
■ Troubleshooting
If you cannot connect the headset to your compatible Bluetooth device,
do the following:
• Ensure that the headset is charged.
• Ensure that Bluetooth connectivity is activated on the headset and
the other device and the headset is paired with your device.
• Ensure that the CA-143U audio cable is not connected to
the headset.
• Ensure that the headset is within 10 meters (33 feet) of your device
and that there are no obstructions between the headset and the
device, such as walls, or other electronic devices.
See also “Clear settings or reset,” p. 14.