7the settings on your new television, Performing the sound settings – Beko 26WLZ530HID User Manual
Page 19
17
7
The settings on your new television
7.1-Performing the Sound
settings
You may perform Volume settings by using
the
V+ or V- buttons on your television or the
VOL+/VOL- buttons on your remote control.
You can perform other Sound settings by
entering the Sound menu. To do this, press
the
MENU button on your remote control,
select
SOUND menu by pressing the Right/
Left movement buttons and press the OK
button. In this menu, you can select one of
the titles for which you would like to perform
an operation.
SOUND
Volume
Balance
AVL
Off
Sound Type
L+R
Sound Mode
Normal
Equalizer
Headphone
Select
Back
Exit
7.1.1-Balance
To adjust the sound balance between the
right and left loudspeakers to the desired
level, select the Balance tab in the volume
menu by using the
Down movement button.
Using the
Left/Right movement buttons
adjust this option to the desired level.
7.1.2-AVL (Automatic Volume
Limiting)
Television transmitters have different sound
levels. This can be noticed from the different
volume levels that can be heard while
switching from one program to another. Using
the
Right/Left movement buttons, select
ON. The AVL (Automatic Volume Limiting)
function maintains the same sound level as
you switch from program to program. Select
Off to cancel it.
7.1.3-Sound Type
The program you watch may be broadcast
in stereo or in two different languages. Using
the
Right/Left movement buttons in this
menu, you can select Mono/Stereo or Dual-1/
Dual-2.
7.1.4-Sound Mode
If you would like to add some depth to the
sound of the program you are watching,
press
Right/Left movement buttons to select
Normal or Spatial feature.
7.1.5-Equalizer
Select the
EQUALIZER tab in the Sound
menu and confirm with the
OK button. The
Equalizer menu is displayed.
Using the
Right/Left movement buttons, you
may select either one of the preset
Music,
Sports, Cinema and Speech options which
enhance the sound effect depending on the
feature of the program you are watching
or the
User option which you can adjust
as you desire. To adjust the User option,
select
User and press the OK button. You
can adjust the frequency levels with the
Up/
Down movement buttons. You can select
one of the
120Hz, 500Hz, 1.5kHz, 5kHz and
10kHz frequency bands with Right and Left
movement buttons. Press the
MENU button
to store the settings and exit the user option.
Note: You can select the equalizer
options directly by pressing the ( )
button on your remote control.
<
<
EQUALIZER
User
Select
Back
Exit