Performing digital channel settings – Beko 26WLZ530HID User Manual
Page 13
11
6.2-Turning on your television
for the first time and tuning
Installation Guide menu will be displayed on
the screen when you turn on your television
for the first time.
Installation Guide
Language Settings
English
Active antenna power
Auto tuning
Select
Exit
Press
Right/Left movement buttons to
select the desired menu language from the
Language tab. If you are using an active
antenna, (See page 16) set the active antenna
power feature to
On. Select Auto Search
by pressing the down movement button and
confirm your selection with
OK button or the
right movement button. Country Selection
menu will be displayed. Make the Country
and Scan Type selections by pressing the
Up/Down, Left/Right movement buttons.
Time Zone will be set automatically according
to the country selected. If the antenna
connections are correct, press
OK button to
start Auto Search.
Press
EXIT button to cancel the Auto Tuning.
6.3-Performing Digital channel
settings
You can tune the Digital programs
automatically or manually and store them in
your television.
6.3.1-Automatic tuning of digital
channels and storing in the
memory
Press the
MENU button on your
remote control. Select
CHANNEL
SETUP by pressing the Right/Left
movement button and confirm your
selection with
OK button. Select
Auto Tuning tab by pressing the
Up/Down movement buttons and
press
Right movement button or OK
button to confirm. Country Selection
menu will be displayed.
Scroll to the
Country Selection
tab by pressing the
Up/Down
movement buttons and press
Right/
Left movement buttons to select
your country. Then, scroll to the
Scan Type tab by pressing the
Down movement button and select
DTV option by pressing the Right/
Left movement buttons. Press OK button to
confirm your selections. Digital channels are
searched and stored automatically. At the
same moment, the progress of auto tuning
and the channels stored in the memory are
displayed in the menu.
CHANNEL SETUP
Please select country and scan type, then press OK to start tuning
Country Selection
England
Scan Type
DTV
Time Zone
London GMT
Select
Back
Exit
Program Table menu is displayed at the end
of the Auto Tuning.
Note: If you wish to search the Digital and
Analogue channels concurrently, choose
Scan Type as Digital and Analogue from
the
Auto Tuning menu.
Searching
%1 68 MHz
1 C-03
Exit
2 C-04