Toshiba Camileo B10 - Manual (Page 46)

46
EN
Section 11
Troubleshooting
Troubleshooting
The files on the memory card do not display smoothly when the LCD shows the “!” marking. 1.
The “!” symbol means the SD card is too low of a speed or contains corrupted files. The way to solve
this condition is to format SD card by the camcorder instead of a PC (Please refer to the detailed
Format instruction in Section 5).
Or please change the SD/SDHC/SDXC card to a high speed one.
Why do some of my indoor photos look blurry and dark? 2.
The camcorder extends photo exposure time under low light/ indoor condition. Keep the camcorder
(and the target subject) steady for several seconds when taking photos. The shutter will sound when
photos are being taken.
How do I charge battery? 3.
You must use the supplied AC charger or the USB cable. The camcorder must be turned OFF. The
blinking light confirms the camcorder is currently charging, and the light becomes constant after
the charging is completed. In AC charging Mode, the full charge time is about 3.5 to 4.5 hours and
the light will turn itself off automatically after 3~5 minutes when the charging is completed. (Actual
charging time may vary. It depends on the battery conditions.)
After connecting the USB cable to the computer, …… 4.
The disk “DV” indicates the internal memory of the camcorder. 1.
“Removable Disk” indicates the external memory. (If the SD card is inserted in the camcorder.) 2.
The disk “DVAP” indicates the built-in CAMILEO UPLOADER application is saved to this disk. 3.
Please DO NOT format this disk or delete the application inside; otherwise, the CAMILEO
UPLOADER application may not function.