Customizing the function settings (continued), Using the audio setup menu, Night mode – Toshiba SD4015 User Manual
Page 24: Digital out, Hdmi res. (resolution), Jpeg interval, Video
24
Function setup
Customizing the Function Settings (continued)
Night Mode
Night mode is equivalent to Dynamic Range Compress.
When it is On, it reduces the variations between loud and
soft sounds in audio output. You can still hear softer sounds
and dialogue even in very low volume.
Note
Night mode is Dynamic Range Control (DRC) option for
analogue audio output.
DVD
Using the Audio setup menu
Digital out
Selects the output sound format corresponding to your
system connection.
Off:
To disable Digital out.
Bitstream: Disc audio raw data will be output. Select
“Bitstream” if your amplifi er supports “DTS”.
PCM:
Select when connected to a Multi-channel digital
stereo amplifi er. The DVD player outputs sound
in the PCM stereo format when you play a DVD
recorded on the Dolby Digital, MPEG1 or MPEG2
recording system.
HDMI Res. (Resolution)
You can set the HDMI Res. (Resolution) to be Auto,
480p/576p, 720p, 1080i or 1080p, according to the
connected TV.
JPEG Interval
To set the JPEG Interval for slide show playback. Select
“Off” to disable the slide show feature.
5 seconds: Plays back images in the form of a slide show
at 5 seconds interval.
10 seconds: Plays back images in the form of a slide show
at 10 seconds interval.
15 seconds: Plays back images in the form of a slide show
at 15 seconds interval.
1. Press SETUP during stop.
2. Press button to select Audio.
3. Press / button to select the setting item: Digital out or
Night Mode.
4. Press button, then use / button to select the setting
choice on the right.
5. Press ENTER button.
6. Press SETUP button to exit the menu.
Audio
Digital out
Night Mode
Video
The video output of the DVD player can be selected as
RGB or HDMI.
RGB: Select if you connect the DVD player to your TV which
has RGB inputs by scart cable.
HDMI: High Defi nition Multimedia Interface. Select if you
connect the DVD player to TV via HDMI input.
Notes
• Select the HDMI resolution according to the performance
of the connected TV.
• If the Video out is not set to “HDMI”, you cannot select
the “HDMI Res.”.
Note
For the HDMI output, please connect the unit to your TV
via HDMI cable
15
.
Notes
• The displayable picture size is preset on the DVD.
Therefore, the playback picture of some DVDs may not
conform to the picture size you select.
• When you play DVDs recorded in the 4:3 picture size only,
and you own a 16:9 TV set, Video output picture will be
16:9 only when you select the TV picture setting on the
TV.
• If you select “16:9” and you own a 4:3 TV set, the DVD
playback picture will be horizontally distorted during
playback. Images will appear to be horizontally compressed.
Always be sure that your TV shape conforms to the actual
TV in use.