Toshiba SD4015 - Manual (Page 15)

15
Connections
576p/480p, 720p, 1080i and 1080p are signals created
with this DVD Player from original 576i/480i signal. The
resolution of the picture may not be increased even if
they are selected.
• Make the following setting.
On-screen display Select: Page
“PCM” “Digital out”
HDMI “Video”
24
24
Connecting to a display (Using a HDMI TM cable)
HDMI-compatible display
HDMI Cable
To HDMI
Output
(not supplied)
VIDEO
HDMI OUT ANALOG COAXIAL DIGITAL
R
L
Available output signals are below:
• Auto
• 576p/480p (progressive)
• 720p (progressive)
• 1080i (interlaced)
• 1080p (progressive)
Switching the video quality (HDMI mode) using
HDMI button on the remote control or HDMI
SELECT button on the front panel.
Press HDMI button on the remote control or HDMI
SELECT button on the front panel to receive a suitable
video quality. The video quality is required to match your
TV having HDMI feature and suitable quality. Please
also check your TV owner’s manual. Press this button
to change the output signals as below. See the HDMI
indicator and select the appropriate output signal.
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD player to your TV, be sure to
turn off the power and unplug both units from the wall outlet
before making any connections.
• If you have a HDMI (with HDCP) equipped monitor or
display, you can connect it to this player using a HDMI
cable.
• The HDMI connector outputs uncompressed digital video,
as well as almost every kind of digital audio that the player
is compatible with, including DVD-Video, Video CD/Super
VCD, CD, MP3 and DivX
® .
• This unit has been designed to be compliant with HDMI
(High Defi nition Multimedia Interface) depending on the
component you have connected. Using a HDMI connection
may result in unreliable signal transfers.
• Because HDMI is an evolving technology, it is possible that
some devices with an HDMI input may not operate properly
with this DVD player.
• When using HDMI cable, do not connect to other analog
video outputs.
• HDMI output is only available when the Video out is set to
“HDMI”. Otherwise the HDMI button is invalid.
About HDMI
HDMI (High Defi nition Multimedia Interface) supports both
video and audio on a single digital connection for use with
DVD players, DTV, set-top boxes, and other AV devices.
HDMI was developed to provide the technologies of High
Bandwidth Digital Content Protection (HDCP) as well as
Digital Visual Interface (DVI) in one specifi cation. HDCP
is used to protect digital content transmitted and received
by DVI-compliant or HDMI-compliant displays. HDMI has the capability to support standard, enhanced, or
high-defi nition video plus standard to multi-channel surround-
sound audio. HDMI features included uncompressed digital
video, a bandwidth of up to 2.2 gigabytes per second (with
HDTV signals), one connector (instead of several cables and
connectors), and communication between the AV source and
AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
licensing LLC.
illuminates “ • 1080i ” 1080i (interlaced)
illuminates “ • 720p ” 720p (progressive)
illuminates “ • 576p/480p ” 576p/480p (progressive)
Press
Press
Press
Press
illuminates “ • 576p/480p ,
• 720p, • 1080i, • 1080p”
Auto
Press
illuminates “ • 1080p ” 1080p (progressive)
HDMI indicator Video output signal