Advanced network setup – Toshiba TL969 User Manual
Page 48
48
CONTROLS AND FEATURES
En
glis
h
NOTE: Even if an AP for IEEE 802.11n is used when Encryption
is set to WEP or TKIP, the Speed value might be low. It is
recommended that Encryption be changed to AES (see
“Manual Setup” on page 47).
Notes on wireless LAN environment
• The function of all IEEE802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or IEEE 802.11n on
5 GHz for audio and SD video streaming.
• It is recommended to use IEEE 802.11n on 5 GHz for HD
video streaming.
• It is recommended that the encoding rate for streaming
video content is 20 Mbps or less.
• It is not recommended to use 2.4 GHz for audio and video
streaming.
• Content playback may be interrupted by various
surrounding interference.
NOTE:
• When the DHCP function of the router connected with this
TV is On, you can set Auto Setup to On or Off.
(This should usually be set to On.)
• When the DHCP function of the router is Off, set Auto Setup
to Off, and set the IP Address manually.
IP Address Setup
Auto Setup
a
In the Preferences menu, press
B
or
b
to select
Network Setup and press OK.
b
Press
B
or
b
to select Advanced Network Setup
and press OK.
c
Press
B
or
b
to select IP Address Setup and press
OK.
d
Highlight Auto Setup and press
C
or
c
to select On.
NOTE: Other items will be grayed out when Auto Setup is set
to On.
Manual Setup
a
In the Preferences menu, press
B
or
b
to select
Network Setup and press OK.
b
Press
B
or
b
to select Advanced Network Setup and
press OK.
c
Press
B
or
b
to select IP Address Setup and press
OK.
Item
Description
Status
Connected is displayed when the TV is
connected with the AP.
Disconnected is displayed when the TV is
not connected with the AP.
Signal
Connection signal strength with AP
(STRONG/MEDIUM/WEAK)
Speed
Link with AP
Mode
Working mode (11a, 11b, 11g, 11n)
Network Name
SSID set
Authentication
Authentication set
Encryption
Encryption set
Security Key
Security Key set
AP MAC
Address
The AP’s MAC address is displayed when
the TV is connected with the AP.
TV MAC
Address
The MAC address of the TV(Wireless) is
displayed.
DHCP
Enabled is displayed when using DHCP.
Disabled is displayed when not using
DHCP.
IP Address
The TV’s IP address
Subnet Mask
Value of the Subnet Mask
Default
Gateway
Address of the Default GATEWAY
DNS
Address of the DNS
Advanced Network Setup
Connection Type
Wired
Advanced Network Setup
Network Setup
Wireless Setup
IP Address Setup
MAC Address
DNS Setup
Advanced Network Setup
Auto Setup
On
Subnet Mask
IP Address Setup
IP Address
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
Default Gateway
. . .