Toshiba W1443 - Manual (Page 36)

English - 36 -
English
Using Media Browser
This TV allows you to enjoy photo, music or video files stored on a USB device.
Manual Start
To display Media Browser window, press the “ ” button
on the remote control. The Media Browser menu is also
accessable from the main menu. Press the MENU button
on the remote. Select Media Browser by pressing Left
or Right button and press OK.
Select the media type to be listed and press OK.
If there is more than one media source available, a
list of devices will be displayed. Highlight the device
from the list and press OK.
Auto Start
When you plug a USB storage device, the following
menu will be displayed.
You can play or view music, video and picture files
from an USB storage device connected to the USB
port.
To display the files with folders, select
Settings tab
and change View Style to Folder. So the selected
type of files in the selected folder will be displayed.
Additionally the All tab will be added to the main
Media Browser menu. To list all available music,
video and picture files in the selected folder at once,
select All tab and press OK button.
If View Style is set to Flat, all selected type of files
will be listed. If for instance, Video is selected in the
main Media Browser menu, TV will search the source
for all video files and list them.
Note:
• Some USB compliant devices may not be supported.
• If the USB storage device is not recognized after
power off/on or First Time Installation, plug the
USB device out and power off/on the TV set. Then
plug it in again.
• Do not use a USB Hub.
• You must obtain any required permission from
copyright owners to use copyright content.
Toshiba cannot and does not grant such permission.
• Depending on the file size and amount in your USB
storage device, it may take some time for loading
to view. A message will be displayed on the screen
when loading files from the USB device.
• Only limited types of USB devices are supported.
Therefore, it is suggested not to use USB for playing
Media Player.
• Non-supported characters will be replaced with a
square (□).