Toshiba W1443 - Manual (Page 35)

English - 35 -
English
Other Controls -
continued
Audio Description
Audio description refers to an additional narration
track for blind and visually impaired viewers of visual
media, including television and movies. The description
narrator talks through the presentation, describing
what is happening on the screen during the natural
pauses in the audio (and sometimes during dialogue,
if deemed necessary). You can use this feature, only if
the broadcaster supports that additional narration track.
• Highlight Audio Description by pressing Up or
Down button.
• Press OK button to enter Audio Description
submenu.
• Use Up or Down button to select Audio Description
setup and then press Left or Right button to set
this setting.
Auto TV Off
You can set the timeout value of auto off feature. After
the timeout value is reached and the TV is not operated
for selected time, the TV will go off. Press MENU button
and select Settings by using Left or Right button. Press
OK button to continue. Use Up or Down button to select
Other Settings and then press OK button. Select Auto
TV Off using Up or Down button.
Standby Search (optional)
If the Standby Search is set to On and the TV is in standby
mode, the TV will look for any changes in the saved
channels. Press MENU button and select Settings by
using Left or Right button. Press OK button to continue.
Use Up or Down button to select Other Settings and
then press OK button. Select Standby Search using
Up or Down button and use Left or Right button to set.
Bisskey
Biss is a satellite signal scrambling system that is
used for some broadcasts. If you need to enter BISS
key on a broadcast, you can use Biss Key setting.
Highlight Biss Key and press OK to enter keys on the
desired broadcast.
Store Mode
If you set Store Mode to Enabled, your TV’s
features will be illustrated on the top of the screen. To
deactivate this feature, set to Disabled.
Po wer Up Mode
This setting configures the power up mode preference.
Standby: The TV always powers up in Standby mode.
Last State: The TV always switches on with the last
selected channel/source.
CEC
This function allows to control the connected HDMI-
CEC compatible devices with the remote control of the
TV. Press Left or Right button to enable the feature.
Select the HDMI input of the connected device from
the source menu. The TV remote is automatically
able to control most functions of the device (navigate
menus, change channels, launch the disc etc.).
To terminate this operation and control the TV via the
remote again, press and hold the “0-Zero” button on
the remote control for 3 seconds.
. It is also possible to disable this feature in the
configuration menu of the connected HDMI device.
Refer to the operating instructions of the related device.
CEC operation is available if a CEC device is present.
CEC Auto Power On
This function allows the connected HDMI-CEC
compatible device to turn on the TV and switch to its
input source automatically.
Press
Left or Right button to enable or disable the
feature.
Note: The audio device should support System Audio Control
feature and CEC option should be set as Enabled.