beautypg.com

Controlling the tv, English – Toshiba W1443 User Manual

Page 13

background image

English - 13 -

English

Controlling the TV

A wide variety of external equipment can be connected via the sockets located on the side and back of the

TV. Whilst all the necessary adjustments and controls for the TV are made using the remote control, the

control switch

on the

left side

of the TV may be used for some functi

ons.

Switching on

If the standby LED is unlit, check that the mains plug

is connected to the power and press the middle of
the button on the left side of the TV to switch the

television on.
To put the television into Standby, press button on

the remote control. To view the television, press

button again. The picture may take a few seconds

to appear.
Note: The active Standby LED colour will turn to red

in a few moments when the TV is switched off.

For energy saving:

Turning the TV off at its mains supply, or un-plugging

it, will cut energy use to nearly zero for all TV’s. This

is recommended when the TV is not being used for a

long time, e.g. when on holiday.

Using the Remote Control

Press the

MENU button on the remote control to see

the menus.
The main menu appears as a group of icons each

for a menu option. Press the Left or Right button to

select a topic.
In sub menu screen

mode the menu appears as a

list. Press the Up or Down button to select a topic.

To use the options press the Up and Down buttons

on the remote control to move up and down through

them and OK, Left or Right buttons to select the

required choice. Follow the on screen instructions.

The functions of each menu are described in detail

throughout the manual.

Using the Controls on the TV

Using the menu wheel on the side of the TV:
To change volume: Press the middle button

until the volume level OSD appears. Increase the

volume by pushing the button up. Decrease the

volume by pushing the button down.

To change channel: Press the middle button until

the channel information banner appears. Scroll

through the stored channels by pushing the button

up or down

To change source: Press the middle button until

the source list appears. Scroll through the available

sources by pushing the button up or down.

To turn the TV off: Press the middle of the button

down and hold it down for a few seconds, the TV

will turn into standby mode.

Please always refer to the owner’s manual of the

equipment to be connected for full details.

This manual is related to the following products: