Toshiba Qosmio F60 - Manual (Page 188)

9-16 User’s Manual
Qosmio F60 Series
USB mouse
The reaction of Touch
pad is either too
sensitive or not
sensitive enough. Adjust the touch sensitivity.
1. Click Start -> Control Panel -> Hardware
and Sound -> Mouse (under “Devices and
Printers”).
2. Within the Mouse Properties window, click
the Device Settings tab.
3. Click the Settings...button.
4. The Properties for Synaptics TouchPad™
on PS/2 Port screen appears. Double-click
Sensitivity in the Select an item -> Pointing
section on the left side of the screen.
5. PalmCheck™ and Touch Sensitivity are
displayed. Click Touch Sensitivity.
6. Move the slide bar for Touch Sensitivity to
make an adjustment. Click the OK button.
7. Click the OK button on the Device Settings
tab.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Problem Procedure
On-screen pointer
does not respond to
mouse operation In this instance the system might be busy -
Try moving the mouse again after waiting a
short while.
Remove the mouse from the computer and then
reconnect it to a free USB port it in order to
ensure it is firmly attached.
Double-clicking does
not work In this instance, you should initially try changing
the double-click speed setting within the Mouse
Control utility.
1. To access this utility, click Start -> Control
Panel -> Hardware and Sound -> Mouse
(under “Devices and Printers”).
2. Within the Mouse Properties window, click
the Buttons tab.
3. Set the double-click speed as required and
click OK.
Problem Procedure