Toshiba Qosmio F60 - Manual (Page 182)

9-10 User’s Manual
Qosmio F60 Series
Some CD/DVD/BDs
run correctly, but
others do not The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software’s needs.
Check the CD/DVD/BD’s documentation.
Check the type of CD/DVD/BD you are using.
The drive supports:
BD-ROM: BD-ROM, BD-ROM DL, BD-R,
BD-R DL, BD-RE, BD-RE DL
DVD-ROM: DVD-ROM, DVD-Video, DVD-R,
DVD-RW, DVD+R, DVD+RW,
DVD-RAM
CD-ROM: CD-DA, CD-Text, Photo CD (single/
multi-session), CD-ROM Mode 1,
Mode 2, CD-ROM XA Mode 2
(Form1, Form2), Enhanced CD
(CDEXTRA)
Recordable Disc: CD-R, CD-RW, DVD-R, DVD-
R(DL), DVD-RW, DVD+R,
DVD+R(DL), DVD+RW, DVD-RAM,
BD-R, BD-R(DL), BD-RE, BD-
RE(DL)
Check the region code on the DVD. It must
match that on the BD drive. Region codes are
listed in the
Optical disc drives section in
Chapter 2, The Grand Tour .
Cannot write correctly If you have trouble in writing, make sure you
have taken the following precautions:
Use only media recommended by TOSHIBA.
Do not use the mouse or keyboard while writing.
Use only the software supplied with the computer
for recording.
Do not run or start other software while writing.
Do not jar the computer while writing.
Do not connect/disconnect external devices or
install/remove internal cards while writing.
If problems persist, contact your dealer.
Problem Procedure