Toshiba NB250 - Manual (Page 90)

User’s Manual 8-7
Optional Devices
Battery Packs
You can increase the portability of the computer with additional battery
packs so that, if you're away from an AC power source and your battery
runs low, you can replace it with a freshly charged battery. Please refer to
Chapter 6, Power and Power-up Modes for further information.
Universal AC Adaptor
If you frequently use your computer at more than one site, it may be
convenient to purchase an additional AC adaptor to be kept at each site in
order to remove the need to always carry the adaptor with you.
USB floppy diskette drive
The external FDD module can be connected to the USB port.
External monitor
An external analog monitor can be connected to the computer's external
monitor port. In order to connect a monitor, follow the steps as detailed
below:
1. Connect the monitor cable to the external monitor port.
Connecting the monitor cable to the external monitor port
2. Turn the external monitor’s power on.
When you turn on the power, the computer will automatically recognize the
monitor and determine whether it is a color or monochrome device. In the
event that you find that there are issues getting an image displayed on the
correct monitor, you should consider using the FN + F5 hot key to change
the display settings. If you then disconnect the external monitor before you
turn the computer's power off, be sure to press FN + F5 hot key again to
switch to the internal display.
Please refer to Chapter 5,
The Keyboard , for further details on using hot
keys to change the display setting.
1. External Monitor port 2. Monitor cable
2
1