Toshiba Tecra R10 - Manual (Page 164)

8-12 User’s Manual
TECRA R10
Smart Card
For further information, please refer to Chapter 3, Hardware, Utilities and
Options .
Pointing device
If you are using a USB mouse, you should also refer to both the USB
device section in this chapter, and the documentation supplied with your
mouse.
Touch Pad
Problem Procedure
Smart Card error
occurs Remove the Smart Card from the computer,
make sure to confirm that the card oriented
correctly and reinsert it in order to ensure it is
firmly connected.
If the problem persists, then you should refer to
the documentation supplied with your Smart
Card for further information.
Problem Procedure
On-screen pointer
does not respond to
pointing device
operation In this instance the system might be busy -
Try moving the mouse again after waiting a short
while.
Double-tapping does
not work In this instance, you should initially try changing
the double-click speed setting within the Mouse
Control utility.
1. To access this utility, click Start -> Control Panel
-> Hardware and Sound -> Mouse icon.
2. Within the Mouse Properties window, click
the Buttons tab.
3. Set the double-click speed as required and
click OK.
The on-screen pointer
moves too fast or too
slow In this instance, you should initially try changing
the speed setting within the Mouse Control utility.
1. To access this utility, click Start -> Control
Panel -> Hardware and Sound -> Mouse
icon.
2. Within the Mouse Properties window,
click the Pointer Options tab.
3. Set the pointer speed as required and
click OK.