Toshiba Satellite Pro S200 - Manual (Page 133)

User’s Manual 6-9
TECRA A9, TECRA S5, Satellite Pro S200, Satellite Pro A150
Removing the battery pack
To remove a discharged battery, follow the steps as detailed below:
1. Save your work.
2. Turn the computer’s power off - ensure that the Power indicator is off.
3. Remove all cables and peripherals that are connected to the computer.
4. Close the display panel and turn the computer upside down.
5. Slide the battery lock (1) into its (
) position to disengage the battery
pack.
6. Slide and hold the battery release latch (2) and then remove the battery
pack from the computer (3).
Releasing the battery pack
Installing the battery pack
To install a battery pack, follow the steps as detailed below:
1. Insert the battery pack as far as it will go into the computer (1).
2. Ensure that the battery pack is securely in place and the battery lock (2)
is in its ( ) position.
Securing the battery pack
3. Turn your computer over.
Battery release latch
Battery pack
Battery lock
Do not touch the battery release latch while holding the computer or the
battery pack might fall out due to the unintentional release of the battery
release latch and cause injuries.
Battery pack
Battery lock