External monitor, External monitor -19 – Toshiba Qosmio F30 (PQF32) User Manual
Page 193
User’s Manual
9-19
Optional Devices
External monitor
An external analog monitor can be connected to the external monitor port
on the computer. The computer supports various video modes. Refer to
Appendix B,
for details on video mode. To
connect a monitor, follow the steps below.
1. Turn the computer off.
2. Connect the monitor cable to the external monitor port and tighten the
screws on the left and right hand side.
Connecting the monitor cable to the external monitor port
3. Turn the monitor’s power on.
4. Turn the computer on.
When you turn on the power, the computer automatically recognizes the
monitor and determines whether it is color or monochrome.
To change the display settings, press Fn + F5. If you disconnect the
monitor before you turn the computer off, be sure to press Fn + F5 to switch
to the internal display. Refer to Chapter 5,
, for details on
using hot keys to change the display setting.
Monitor cable
External monitor
port