Toshiba Magnia Z500 - Manual (Page 38)

MegaRAID Configuration Console
Close Server
38
Close Server
To exit this RAID server, click on “Close Server” in the left frame.
About rebuild array
If fail occures on physical drive
If drive fail occures on physical drive, beep sounds. And Fault
LED of fail drive is turned on. In that case, rebuild the array.
Rebuild array
Using MegaRAID Configuration Console, you can rebuild array
by the following procedures.
1 Remove the fail drive. When remove the drive, operation of
OS may slow for a few minutes.
2 Click on “Scan Devices”. After clicking on, redrawing screen
may slow for a few minutes.
3 Insert new drive.
4 Click on “Scan Devices”.