Setting mcc.properties – Toshiba Magnia Z500 User Manual
Page 11
MegaRAID Configuration Console
Installation
11
Setting mcc.properties
This file is used by MegaRAID Web Server. You can set port
number that MegaRAID Web Server uses, name of RAID Server,
and port number that MegaRAID Server service uses.
In this file, there are another parameters:
FRMFILE_DIRECTORY, LOGFILE_DIRECTORY, and start-
serverauto. These parameters are inoperative. Please don’t modify
these parameters.
!
Port number for MegaRAID Web Server
This port number is used to connect from web browser to
MegaRAID Web Server. Default setting is “5555”. If you
would like to change port number, please write the number like
this .
port=
Ex) port=1234
If you change the port number, URL address to access to
MegaRAID Configuration Console is changed.
http://localhost:
Ex) http://localhost:1234/
!
Name of RAID Server
MegaRAID Web Server connects to this name of RAID
server. And the target of the “localhost” is this name server.
When you install Client, please set the name of Registration
Server.
RAID_SERVER_NAME=
Ex) RAID_SERVER_NAME=Server1
!
Port number for MegaRAID Server
This port number is used to connect from MegaRAID Web
Server to MegaRAID Server service. The port number must
be the same as in Regserv.dat. If you install Client, please set
number as same as in Regserv.dat of Registration Server.