Toshiba Satellite P100 (PSPAD) - Manual (Page 93)

User’s Manual 6-7
Power and Power-Up Modes
Charging the batteries
When the power in the battery pack becomes low, the Battery indicator
flashes amber indicating that only a few minutes of battery power remain. If
you continue to use the computer while the Battery indicator flashes, the
computer enables Hibernation mode (so you don’t lose data) and
automatically turns off.
You must recharge a battery pack when it becomes discharged.
Procedures
To recharge a battery pack while it is installed in the computer, connect the
AC adapter to the DC IN socket and plug the other end into a working
outlet.
The Battery indicator glows amber when the battery is being charged.
Time
The following table shows the time required to fully charge a discharged
battery.
Charging time (hours)
Use only the computer connected to an AC power source to charge the
battery pack. Do not attempt to charge the battery pack with any other
charger.
Battery type Power on Power off
Battery pack about 12 or longer about 4 or longer
RTC battery about 24 about 24 with AC or
Battery pack
The charging time when the computer is on is affected by ambient
temperature, the temperature of the computer and how you use the
computer.
If you make heavy use of external devices, for example, the battery might
scarcely charge at all during operation. Refer also to the section
Maximizing battery operating time. The same factors affect charge time.