Toshiba Satellite P100 (PSPAD) - Manual (Page 88)

6-2 User’s Manual
Power and Power-Up Modes
Power indicators
As shown in the above table, the Battery, DC IN and Power indicators on
the system indicator alert you to the computer’s operating capability and
battery charge status.
Battery indicator
Check the Battery indicator to determine the status of the battery. The
following indicator lights indicate the battery status.
AC adapter
not
connected
Battery capacity
is above low
battery trigger
point
• Operates
• LED: Battery off
DC IN off
Battery capacity
is below low
battery trigger
point
• Operates
• Alarm sounds (depending
on the Low Battery Alarm
item of CMOS SETUP
menu & Power Options
setting)
• LED: Battery flashes
amber
DC IN off
Battery capacity
exhausted
Computer goes into
Hibernation or shuts down
(depending on the Power
Options setting)
No battery
installed
• No operation
• LED: Battery off
DC IN off
Power on Power off (no operation)
Flashing amber The battery charge is low. The AC adapter must
be connected to recharge the battery
Amber Indicates the AC adapter is connected and
charging the battery.
Blue Indicates the AC adapter is connected and the
battery is fully charged.
No light Under any other conditions, the indicator does
not light.