Toshiba Qosmio G50 - Manual (Page 221)

User’s Manual C-3
Qosmio G50
2.4GHz Band Channels Sets (Wireless IEEE 802.11 Revision b, g and
n draft 2.0)
*1 Factory-set default channels
*2 The approved channels on using are different at each country or region.
The channel configuration is managed as follows:
■ For wireless clients that operate in a Wireless LAN Infrastructure, the
Wireless LAN module will automatically start operation at the channel
identified by the Wireless LAN Access Point. When roaming between
different access points the station can dynamically switch to another
channel if required.
■ For Wireless LAN modules installed in wireless clients that operating in
a peer-to-peer mode, the module will use the default channel 10.
■ In a Wireless LAN Access Point, the Wireless LAN module will use the
factory-set default channel (printed in bold), unless the LAN
Administrator selected a different channel when configuring the
Wireless LAN Access Point device.
Frequency Range
Channel ID 2400-2483.5 MHz
1 2412
2 2417
3 2422
4 2427
5 2432
6 2437
7 2442
8 2447
9 2452
10 2457* 1
11 2462
12 2467* 2
13 2472* 2