Toshiba Satellite U920T User Manual
Page 89
If a Supervisor Password has been set, manual boot device selection
functions may be restricted.
The boot device selection methods described above will not change the
boot priority settings that have been configured in TOSHIBA System
Settings. In addition, if you press a key other than one of those listed, or if
the selected device is not installed, the system will continue to boot
according to the current and available settings in TOSHIBA System
Settings.
Boot speed
This option allows you to select system boot-up speed.
Fast
Reduces system boot-up time. System can boot
only from the built-in HDD and only internal LCD
and keyboard are supported during the boot
process.
Normal
System boots up at normal speed.
USB Memory Boot Mode
This option allows you to set the type of the USB memory to be used as a
startup device.
HDD Type
Sets the USB memory to be the equivalent of a
hard disk drive (default). With this setting, the
USB memory device can be used to start the
computer as though it were a hard disk drive
based on the hard disk drive settings within both
the Boot Priority and HDD Priority options
detailed previously.
FDD Type
Sets the USB memory to be the equivalent of a
floppy diskette drive. With this setting, the USB
memory device can be used to start the
computer as though it were a floppy diskette
based on the floppy diskette drive settings within
the Boot Priority option detailed previously.
Keyboard
This tab allows you to set conditions for the Keyboard.
Function Keys mode
This feature allows you to configure the Function Keys Mode. Please refer
to the
section for more information about function keys.
User's Manual
5-12